Upgraded Heating Trimmer
HOTTER, FASTER, EASIER
Edges Cleaning hot knife for
SGP PVB laminated safety glass

Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is availabe for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

8 replies on “”

  1. YOU NEED FAST PROXY SERVERS ?

    Check it out this Anonymous and Private Proxy Servers.
    HTTP & SOCKS5 Proxy supported.
    IP Authentication or Password Authentication available.
    HERE: https://bit.ly/3ifZkmL

  2. [url=https://mukis.ru]купить промокод для яндекс директ[/url] – промокод яндекс директ 3000 3000, купоны гугл адвордс купить

  3. [url=https://kursy-ege.ru/russian/62-tutor-russian.html]репетитор по русскому языку егэ[/url] – маков и партнеры подготовка к егэ, математик подготовка к егэ

  4. [url=https://stop-nark.ru/narko/25-prinuditelnoe-lechenie.html]принудительное лечение наркозависимых[/url] – лечение наркомании в стационаре, лечение алкоголизма недорого

  5. YOU NEED FAST PROXY SERVERS ?

    Check it out this Anonymous and Private Proxy Servers.
    HTTP & SOCKS5 Proxy supported.
    IP Authentication or Password Authentication available.
    HERE: https://bit.ly/3ifZkmL

Comments are closed.