Author Archives: cncglass
Vacuum bag sealant tapes Economical multi-purpose sealant tape Yellow sealant tape
Vacuum bag sealant tapes Economical multi-purpose sealant tape for forming high temp vacuuming bag with bagging films Peter [email protected]: +86 15013829504WeChat: wecan365Mobile: +86 15013829504www.cncglass.comVacuum bag sealant tapes Economical multi-purpose sealant tape Yellow sealant tape*Yellow sealant tape is an economical multi-purpose sealant tape with high temp resistance. It’s uitable for cure applications up to 400F(204C).*Economical vacuum …
EVAFORCE INTERLAYER FOR LAMINATED SAFETY GLASS BEST CHOICE TO REPLACE EVASAFE INTERLAYER Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www_cncGlass_com www_cncEVA_com Due to their molecular structures and arrangements they are amorphous polymer materials, and that is why both of them have excellent optical properties, and the reason of why they have been used …
Upgraded Heating Trimmer HOTTER, FASTER, EASIER Edges Cleaning hot knife for SGP PVB laminated safety glass Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to …
Upgraded Heating Trimmer HOTTER, FASTER, EASIER Edges Cleaning hot knife for SGP PVB laminated safety glass Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to …
Upgraded Heating Trimmer HOTTER, FASTER, EASIER Edges Cleaning hot knife for SGP PVB laminated safety glass Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to …
Edges Cleaning hot knife for SGP PVB laminated safety glass Hand operated tool for cutting small quantities, for short-time operation only. To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric. Fitted with cutting foot, the combined tool is especially effective for cutting synthetic fabric without cutting surface. Controlling heating by switching the toll on and off Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 Hot Knife Electric Rope Cutter Cautions Always operate the Hot Knife in well ventilated space. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped. Only operate Hot Knife when it is in contact with the insulation board Keep hot blades away from skin, clothing and other flammable materials. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.
Green polyester tape is ideal for safety glazing edges masking and general powder coating applications; it is the industry standard for polyester tape. Removes cleanly from surfaces without leaving a residue Maximum Temperature: 500 degrees F Total Thickness: 3.5 mils This Polyester Tape has a silicone adhesive and is great for Powder Coating and can …
Green polyester tape is ideal for safety glazing edges masking and general powder coating applications; it is the industry standard for polyester tape. Removes cleanly from surfaces without leaving a residue Maximum Temperature: 500 degrees F Total Thickness: 3.5 mils This Polyester Tape has a silicone adhesive and is great for Powder Coating and can also be used for safety glazing edges masking, E-Coating, Plating and Anodizing. It can also be used for applications such as taping off large surfaces, general purpose die cutting, PC board masking. Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncglass.com www.cnceva.com
Green polyester tape is ideal for safety glazing edges masking and general powder coating applications; it is the industry standard for polyester tape. Removes cleanly from surfaces without leaving a residue Maximum Temperature: 500 degrees F Total Thickness: 3.5 mils This Polyester Tape has a silicone adhesive and is great for Powder Coating and can …